We exports wide range of Industrial Screw Conveyor in various specifications. Screw conveyors have been a popular material handlingmechanism. Screw conveyors are used horizontally or at a slight incline as an efficient way to move semi-solid materials. It usually consists of a trough containing either a spiral coiled around a shaft, driven at one end and held at the other, or a Shaftless Spiral, driven at one end and free at the other. We have supplied these as a part of larger equipments and replacements.

This screw conveyor is suitable for transportation of fine, coarse or granular materials like plastic granules, cement raw mix, chemicals, etc. Sometimes even transportation of liquids is done with its help.

Screw conveyors are manufactured up to 1500 mm diascrew manufactured in MS and Stainless and Steel material in horizontal, inclined and vertical position. We also exports Jacketed Screw Conveyor to maintain temperature inside the conveyor.

This type of conveyors are available in 150mm Dia to 400mm Dia. Jacket arrangement is to begiven for maintaining temperature inside the S.C. (Hot or Cold).

M.O.C.: Depend upon characteristic of material S.S. or M.S.

Chain Conveyor is basically a convenient way for transporting bulk material from one location to another in horizontal, inclined and vertical position. In this, one or more chains act as the conveying element and it can convey material multi-dimensionally at a time. The conveyor adapts it arrangement to any local condition.

Chain conveyors are exported / supplied in various types i.e. Apron,Slat, U, Drag and Redler chain types to convey material in horizontal inclined and vertical position.

The Chain Type Conveyor is available in various sizes of width from 200 mm to 2000 mm width. Chains read in Double Strands generally.

Conveyor is closed from all sides and “Drag Plate” is fixed in between two rows of chains runningparallel to each other.

Chain conveyors generally have double or triple strands of chains running over fabricated frames. They are often used in conjunction with roller conveyors, handling cartons, bins, warehouses etc. A chain conveyor provides good positive drive and is an economical form of transportation of goods.

A comprehensive range of low power consuming, sturdy chain conveyors, manufactured using quality raw material can also be offered as per customer’s specifications.

Series of Chain Conveyors includes:

• Gravity Conveyor
• Fine Conveyer
• Uni-Con
• Ois Conveyor
• Portable Conveyor

Industrial roller chains used for carrying the materialdepending upon geometry of material to be carried, available space and ambient conditions, it can be constructed in ½”, 5/8”, ¾” , 1”, 1.5” pitch with simplex, duplex and triplex chain.

Being standard available chains are used, these conveyors are easy to manufacture as well as easy for maintenance. These conveyors are generally used for carrying materials like steel billets cold or hot upto 1200 deg C, forged / cast items etc.

These conveyors are used to convey forged components from forging press to trimming press. Width of conveyor depends upon dimensions of component to be handled. Heavy to Medium sized components can be handled on these types of conveyors.

These conveyors are also used to handle flash from trimming press. These are high speed conveyors.

Industrial belt conveyor is basically a conveyorconsisting of two or more pulleys that have a continuous loop of material that rotates about them. Either one or both pulleys are powered and the belt moves along with the materials on the belt.

Belt Conveyors can be offered in different width from 100 mm to 1800 mm width and in different types such as trough, flat, inclined portable and movable to suit customer applications.

Belt Conveyors consist of

• Drive Pulley (Rubber Lagging)
• Take-up Pulley
• Snub Pulley
• Carrying Idlers
• Return Idlers
• Drive Unit
• Supporting Structure

With the successful execution of supplies of EOT cranes to steel industry, we have recently added one more product to our basket, jib cranes & industrial hoists.

The Following Types Of Cranes Can Be Offered:

• Single Girder Eot Crane
• Double Girder Eot Crane
  • Gantry Crane
  • Jib Crane

We Also Offer:

• Electric Chain & Wire rope hoists
• Chain pulley clocks

Conveyors in different industries require different types of belts based on their applications.

We supply wide range of belts caters to critical requirements of material handling applications in the movement of loose bulk material. These belts are fabricated from various materials such as rubber compounds, PVC, Nylon and Urethane

We supply conveyor belts upto 2000 mm width and in various grades conforming to international standards. We also offer customised solutions depending upon their requirements and specifications.

We export a comprehensive range of Power Transmission Products that form an integral part of the conveyor system. Based on the technical guidance of experts, we specialize in providing variety of Power Transmission Products including Sprockets, V Belts, Pulleys, Couplings, Pinions and more. All these products are superior in quality and provide reliable operation in a cost-effective manner. We offer the following transmission products:

Sprockets

• Roller chain sprockets
• Conveyor chain sprockets
• Elevator chain sprockets
• Silent chain sprockets

V Belt pulleys

• With and without taper bushes

Coupling

• Pin/bush type
• Flexible
• Chain Couplings
• Jaw Couplings
• Gear couplings
• Fluid couplings

Roller Chain Sprockets are available from 4mm pitch to 4” pitch in single and multiple strands manufactured out of standard mild steel material, carbon steel material with duly flame hardened teeth and also from stainless steel material with various grades.

Pin Bush Type Flexible-coupling contains  set of cone-flex ring along with pins and nuts. This cone flex ring  is added to give flexibility to the rubber which can be moved in any direction.

We execute  supplies of flexible chain coupling. It is plain, sophisticated and has highest efficiency. It has the capacity to hold huge loads.

Make speed variations – PIV chain Drive units are available up to 20 HP in maximum speed range of 6:1 ratio to substitute various make of PIV gear boxes for Cement, Textile, Printing, Fertilizers and thermal power stations.

We offer superior range of pulleys manufactured out of high grade Cast Iron material to suit A to E section belts in single and multiple grooves with and without taper lock bushes.

We offer different types of industrial seamless buckets that are manufactured using best quality steel, in different gauges and also available in Nylon and food grade plastic material. The special types of fabricated buckets can be design and manufacture as per customers specification and application.

Gearboxes are metal casing inside which the whole gear arrangement is kept in a sealed form. The main function of gearboxes is basically to convert the input provided by the prime source into an output of lower RPM and correspondingly to the higher torque.

Worm reduction gear boxes are available up to 10″ center distance and in universal type up to 3.5″ center distance with horizontal or vertical shafts position as required.

Helical Gear reducers are available in various power ratings in multiple stages of reductions to suit customer’s requirements.Special purpose Gear boxes and planetary drives can be designed and manufactured to suit customer requirement.

Geared motors are available from 15 HP in foot and frames mounting for 1000 speed application in compact design and manufactured out of alloy steel material duly hardened and ground gears/ pinions/shafts in multiple states.

• Worm Gear Boxes
• Helical Gear Boxes
• Geared Motors
• Fluid Coupling & Other Couplings
• Planetary Gearbox
• Parallel Shaft Helical Unit
• Bevel Helical Gear Unit
• Surface Aerator Unit
• Tube Mill Unit
• Positive Infinite Variable speed Drive
• Plastic / Rubber Extruder Unit
• Hollow Output Shaft Unit

Conveyor idlers are used to carry or convey conveyor belt loaded with bulk material. These idlers are fabricated from different materials such as heavy guage steel tubing or ERW/Seamless steel tubing, depending upon the requirement and their applications. The pulley of the idlers are fitted on deep groove ball bearings and are provided with labyrinth seals to insulate them from dusts etc. These idlers are specially designed to provide smooth transition of bulk material for long period of time.

Troughing idlers are used for conveying bulk materials, and are designed and manufactured with Troughing angels of 20 deg and 30 deg normally. Idlers of 45 deg trough angle or any other angle are also manufactured as per customer’s design and drawings. We can also design manufacture and supply 5 rollers type idlers. Mounting brackets are manufactured out of standard steel sections to have rigidity and stability of the frame. Shafts are manufactured out of Carbon steel bright steel bars suitable for any torsional load and bending movement.

Rubber disc idlers are known as Impact Idler fitted with rubber rings made from natural / Synthetic / Neoprint material. The fixing arrangement and dimension of rings are suitably design for easy replacement and interchangeability which protect the belt by absorbing impact at loading point. The troughing angle is 20 deg or 30 deg

Return belt idlers are suitably designed to support the return belt to avoid sagging.

Troughing training idlers are provided with guide rollers suitably designed to ensure the proper alignment of belt and automatically trains the belt from misalignment and protect the belt edges from wear and tear.

Return belt Idlers are used for wet and sticky material.

Flat belt training idlers automatically trains the belt from misalignment and protect the belt edges from damages caused by the same. The action is positive for belt operations.

Conveyor pulleys are manufactured out of heavy gauge steel tubing, best quality ERW/ seamless steel tubes and rolled plates duly fitted with carbon steel single piece shafts suitable for torsional load covered with two side of welded plates and heavy hub to suit the shaft dia. The pulleys are rubber lagged with natural synthetic / neoprint material with and without herringbone groove.

List of Idlers:

• Troughing Idler
• Rubber Disc Idlers
• Return Idlers
• Troughing Training Idlers
• Return Belt Rubber Idlers
• Flat Belt Training Idlers